Manufacturer & Exporter of Industrial Valves like, Knife Edge Gate Valves, Automatic Control Valves, Safety Relief Valve, Pilot valves, Pressure Reducing valve, Gas regulator, Jacketed valve,Forged Steel Valves, Ball valve, Butterfly valve, Gate & Globe valve, Check valve, Pulp & Plug Valves, Pinch valve, Diaphragm valve, Flush bottom valve, etc.
Manufacturer & Exporter of Industrial Valves like, Knife Edge Gate Valves, Automatic Control Valves, Safety Relief Valve, Pilot valves, Pressure Reducing valve, Gas regulator, Jacketed valve,Forged Steel Valves, Ball valve, Butterfly valve, Gate & Globe valve, Check valve, Pulp & Plug Valves, Pinch valve, Diaphragm valve, Flush bottom valve, etc. Home About Company Quality of Valves Our Products Range Globally Clients Our Contact

Safety Valves are designed and manufactured to meet the requirement of all a variety of applications as per API 526 and API 520. They also conforms to Standard VIII and the design requirement of Indian Boiler Regulations, they are of Full Lift type direct spring loaded, with a top guide, The full nozzle has the eliminating distortion of the seating surface, as body strain is not transmitted The Nozzle is made from a corrosion resistance stainless Steel material, When closed position, the fluid does not come in contact with the valve Body an therefore only subject to the outlet pressure which is very much lower pressure.

DESIGN :

Self Actuating, Full Lift, Spring Loaded.

DISCHARGE :

Angle

BONNET :

Open or Closed

PRESSURE RATING :

150#, 300#, 600#

MOC :

Cast Iron, Cast Steel, SS 304 / 316, SS 304L / 316L, Gunmetal etc.

SIZE AVAILABLE : ½" X ¾ " TO 16" X 18"

END CONNECTION : Screwed, Flanged End Safety Relief Valves, Safety Relief Valves

WIDELY USED FOR : Steam Boilers, Steam Services, Compressors, Receivers, Burners, Dryers and other Piping Systems and Many More.

FT - 520

FT - 500

Similar to FTVC-520, but with closed bonnet & closed cap. Also available with same sizes and rating as FTVC - 520.

Close Bonnet Safety Valve For Steam Application
 
 

Small Size Flanged End
Safety Relief Valve Model FT-100

FTVC-500


Flanged End Connection Safety Valve

Open Bonnet, Conventional Design, Open Cap with Lever, Valve Size : 20X25 to 200X250.
Orifice size : G (20.0mm ) to R (95.0mm)

FT-110 : Thermal Relief Valve :

FTVC 1160 :


Screwedd End Connection Safety Valve

Sizes: 15X20mm, 20X25mm & 25X40mm.

Suitable for Working Pressure upto 200 bar.

Body: Fored Steel & Investment Cast Stainless Steel

Excellent product for the production of Pump, piping, vessels etc. The valve opens with the increase above set pressure and closes with-in 3 to 4 psig (0.2 to 0.3 Kg/cm2) drop in pressure. The smooth, it does not allows any jack or surge. The valves are also used in refineries and air cra pumping station on Air ports.

 

Our Products List

Knife Edge Gate Valves

Automatic Control Valves

Pneumatic Control Valves

Safety Relief Valve

Pressure Reducing Valve

Pressure Reducing Station

Ball Valves

Butterfly Valves

Globe Valves

Gate Valve

Diaphragm Valve

Pulp Valves

Plug Valves

Flush Bottom Valves

Check Valves (NRV)

Blow Down Valves

Forged Steel Valves

Jacketed Valves

Sight Glass - Flow Indicator

P.T.F.E. / Rubber / P.P. Lined Valves

Home | About | Quality | Products | Clients | Contact | Sitemap
Flowtek Vlaves & Controls - INDIA - All Rights Reserved. www.flowagevalves.com